This is the latest recevied telemetry packets stored in our database for station/object W4IOJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1734930163 | 12.23 Volt | 0 Pkt | 0 Pkt | 8 Pcnt | 0 None |
1734928963 | 12.23 Volt | 0 Pkt | 0 Pkt | 9 Pcnt | 0 None |
1734928363 | 12.23 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1734927163 | 12.23 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
1734926565 | 12.23 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1734925963 | 12.23 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
1734925363 | 12.23 Volt | 0 Pkt | 0 Pkt | 10 Pcnt | 0 None |
1734924763 | 12.23 Volt | 0 Pkt | 0 Pkt | 8 Pcnt | 0 None |
1734924163 | 12.23 Volt | 0 Pkt | 0 Pkt | 5 Pcnt | 0 None |
1734923563 | 12.23 Volt | 0 Pkt | 0 Pkt | 10 Pcnt | 0 None |
1734922963 | 12.23 Volt | 0 Pkt | 0 Pkt | 10 Pcnt | 0 None |
1734922363 | 12.23 Volt | 0 Pkt | 0 Pkt | 9 Pcnt | 0 None |
1734921763 | 12.23 Volt | 0 Pkt | 0 Pkt | 9 Pcnt | 0 None |
1734921163 | 12.23 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1734920563 | 12.23 Volt | 0 Pkt | 0 Pkt | 6 Pcnt | 0 None |
1734919963 | 12.23 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1734919364 | 12.23 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
1734918763 | 12.23 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
1734918163 | 12.23 Volt | 0 Pkt | 0 Pkt | 14 Pcnt | 0 None |
1734917563 | 12.23 Volt | 0 Pkt | 0 Pkt | 11 Pcnt | 0 None |
1734916963 | 12.23 Volt | 0 Pkt | 0 Pkt | 7 Pcnt | 0 None |
1734916363 | 12.23 Volt | 0 Pkt | 0 Pkt | 9 Pcnt | 0 None |
1734915763 | 12.23 Volt | 0 Pkt | 0 Pkt | 14 Pcnt | 0 None |
1734915163 | 12.23 Volt | 0 Pkt | 0 Pkt | 13 Pcnt | 0 None |
1734914563 | 12.23 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)