RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

KE6CHO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE6CHO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1734936301	136	39	31	24	17
1734928651	136	44	34	24	17
1734926102	136	45	34	25	17
1734923552	126	45	33	24	16
1734921001	136	46	34	25	17
1734918451	136	47	35	25	17
1734915902	136	46	35	25	17
1734913352	136	47	35	25	17
1734910803	136	46	34	25	17
1734908252	136	45	34	25	17
1734905702	135	42	33	24	17
1734903152	136	42	32	24	17
1734900603	133	41	32	24	17
1734898053	136	43	33	24	17
1734895503	126	46	34	24	16
1734892953	136	48	35	25	17
1734890403	126	50	35	25	17
1734887853	136	50	36	25	17
1734885303	136	54	40	30	19
1734882753	135	53	40	30	19
1734880204	135	54	41	30	19
1734877654	135	55	41	31	19
1734875104	136	56	41	30	19
1734872554	136	55	41	31	19
1734870005	136	55	41	30	19

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)