RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA7FTH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA7FTH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1730422198	33 Pkt	-70 dBm	3.86 V
1730421274	37 Pkt	-71 dBm	3.86 V
1730420349	33 Pkt	-69 dBm	3.83 V
1730419424	34 Pkt	-70 dBm	3.83 V
1730418499	34 Pkt	-68 dBm	3.86 V
1730417574	34 Pkt	-70 dBm	3.86 V
1730416649	36 Pkt	-69 dBm	3.86 V
1730415725	33 Pkt	-70 dBm	3.86 V
1730414800	35 Pkt	-69 dBm	3.86 V
1730413875	37 Pkt	-69 dBm	3.86 V
1730412951	34 Pkt	-69 dBm	3.86 V
1730412026	33 Pkt	-69 dBm	3.86 V
1730411101	34 Pkt	-69 dBm	3.86 V
1730410177	2 Pkt	-71 dBm	3.83 V
1730409163	40 Pkt	-71 dBm	3.83 V
1730408239	39 Pkt	-69 dBm	3.83 V
1730407313	37 Pkt	-69 dBm	3.86 V
1730406389	38 Pkt	-70 dBm	3.83 V
1730405463	39 Pkt	-70 dBm	3.86 V
1730404538	35 Pkt	-69 dBm	3.86 V
1730403614	39 Pkt	-69 dBm	3.86 V
1730402689	35 Pkt	-69 dBm	3.86 V
1730401766	37 Pkt	-69 dBm	3.83 V
1730400840	2 Pkt	-68 dBm	3.86 V
1730399815	35 Pkt	-68 dBm	3.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)