RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

XE2KK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734957885	16.43 Volt	160 Pkt	50 Pkt	63 Pcnt
1734956083	16.43 Volt	150 Pkt	50 Pkt	61 Pcnt
1734955182	16.43 Volt	140 Pkt	50 Pkt	57 Pcnt
1734954281	16.43 Volt	130 Pkt	50 Pkt	59 Pcnt
1734953380	16.43 Volt	130 Pkt	40 Pkt	56 Pcnt
1734952480	16.43 Volt	120 Pkt	40 Pkt	51 Pcnt
1734951579	16.43 Volt	120 Pkt	40 Pkt	49 Pcnt
1734950678	16.43 Volt	110 Pkt	40 Pkt	44 Pcnt
1734949777	16.43 Volt	110 Pkt	40 Pkt	44 Pcnt
1734948876	16.43 Volt	100 Pkt	30 Pkt	42 Pcnt
1734947975	16.43 Volt	110 Pkt	40 Pkt	45 Pcnt
1734947075	16.43 Volt	110 Pkt	40 Pkt	47 Pcnt
1734946174	16.43 Volt	120 Pkt	40 Pkt	47 Pcnt
1734945273	16.43 Volt	120 Pkt	40 Pkt	46 Pcnt
1734943471	16.43 Volt	110 Pkt	40 Pkt	43 Pcnt
1734942570	16.43 Volt	120 Pkt	40 Pkt	46 Pcnt
1734941670	16.43 Volt	120 Pkt	40 Pkt	48 Pcnt
1734940769	16.43 Volt	130 Pkt	50 Pkt	50 Pcnt
1734939868	16.43 Volt	130 Pkt	40 Pkt	52 Pcnt
1734938967	16.43 Volt	120 Pkt	40 Pkt	49 Pcnt
1734938066	16.43 Volt	130 Pkt	40 Pkt	48 Pcnt
1734937165	16.43 Volt	120 Pkt	40 Pkt	46 Pcnt
1734936264	16.43 Volt	120 Pkt	40 Pkt	46 Pcnt
1734929958	16.43 Volt	80 Pkt	40 Pkt	39 Pcnt
1734929057	16.43 Volt	80 Pkt	30 Pkt	35 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)