This is the latest recevied telemetry packets stored in our database for station/object IU5HKU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Temp* | CPU Load* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734976506 | 33.9 Deg.C | 14 % | 0 | 0 | 0 |
| 1734976206 | 36.7 Deg.C | 37 % | 0 | 0 | 0 |
| 1734975906 | 35.8 Deg.C | 13 % | 0 | 0 | 0 |
| 1734975606 | 34.1 Deg.C | 37 % | 0 | 0 | 0 |
| 1734975306 | 35 Deg.C | 18 % | 0 | 0 | 0 |
| 1734975006 | 32.9 Deg.C | 51 % | 0 | 0 | 0 |
| 1734974706 | 35.1 Deg.C | 15 % | 0 | 0 | 0 |
| 1734974406 | 32.7 Deg.C | 45 % | 0 | 0 | 0 |
| 1734974106 | 36.1 Deg.C | 19 % | 0 | 0 | 0 |
| 1734973806 | 33.4 Deg.C | 48 % | 0 | 0 | 0 |
| 1734973507 | 34 Deg.C | 15 % | 0 | 0 | 0 |
| 1734973206 | 33.4 Deg.C | 40 % | 0 | 0 | 0 |
| 1734972907 | 32.9 Deg.C | 13 % | 0 | 0 | 0 |
| 1734972606 | 32.9 Deg.C | 41 % | 0 | 0 | 0 |
| 1734972306 | 33 Deg.C | 14 % | 0 | 0 | 0 |
| 1734972006 | 33.4 Deg.C | 42 % | 0 | 0 | 0 |
| 1734971707 | 33.9 Deg.C | 15 % | 0 | 0 | 0 |
| 1734971406 | 34.6 Deg.C | 37 % | 0 | 0 | 0 |
| 1734971106 | 32.8 Deg.C | 15 % | 0 | 0 | 0 |
| 1734970806 | 34 Deg.C | 38 % | 0 | 0 | 0 |
| 1734970506 | 34 Deg.C | 15 % | 0 | 0 | 0 |
| 1734970206 | 33.8 Deg.C | 52 % | 0 | 0 | 0 |
| 1734969906 | 35.4 Deg.C | 15 % | 0 | 0 | 0 |
| 1734969606 | 33.3 Deg.C | 28 % | 0 | 0 | 0 |
| 1734969307 | 32.8 Deg.C | 33 % | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU Temp: 0, 0.1, 0
CPU Load: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)