This is the latest recevied telemetry packets stored in our database for station/object 9A6FEJ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Temp* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730423871 | 14.03 Volt | 10 C | 0 | 0 | 0 |
1730422971 | 14.03 Volt | 10 C | 0 | 0 | 0 |
1730422071 | 14.03 Volt | 10.5 C | 0 | 0 | 0 |
1730421171 | 14.03 Volt | 10.5 C | 0 | 0 | 0 |
1730420271 | 14.03 Volt | 10.5 C | 0 | 0 | 0 |
1730419371 | 14.03 Volt | 10.5 C | 0 | 0 | 0 |
1730418471 | 14.03 Volt | 10.5 C | 0 | 0 | 0 |
1730417571 | 14.03 Volt | 11 C | 0 | 0 | 0 |
1730416671 | 14.03 Volt | 11 C | 0 | 0 | 0 |
1730415771 | 14.03 Volt | 11.5 C | 0 | 0 | 0 |
1730414871 | 14.03 Volt | 11.5 C | 0 | 0 | 0 |
1730413971 | 14.03 Volt | 11.5 C | 0 | 0 | 0 |
1730413071 | 14.03 Volt | 11 C | 0 | 0 | 0 |
1730412171 | 14.03 Volt | 11.5 C | 0 | 0 | 0 |
1730411271 | 14.03 Volt | 11.5 C | 0 | 0 | 0 |
1730410371 | 14.03 Volt | 12 C | 0 | 0 | 0 |
1730409471 | 14.03 Volt | 12 C | 0 | 0 | 0 |
1730408571 | 14.03 Volt | 12 C | 0 | 0 | 0 |
1730407671 | 14.03 Volt | 12 C | 0 | 0 | 0 |
1730406771 | 14.03 Volt | 12.5 C | 0 | 0 | 0 |
1730405871 | 14.03 Volt | 12.5 C | 0 | 0 | 0 |
1730404971 | 14.03 Volt | 12.5 C | 0 | 0 | 0 |
1730404071 | 14.03 Volt | 13 C | 0 | 0 | 0 |
1730403172 | 14.03 Volt | 13.5 C | 0 | 0 | 0 |
1730402271 | 14.03 Volt | 14 C | 0 | 0 | 0 |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Temp: 0, 0.5, -64
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)