RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA8MRM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA8MRM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1735151172	7 Pkt	31 dBm	12.14 V
1735150220	4 Pkt	31 dBm	12.14 V
1735149262	7 Pkt	31 dBm	12.14 V
1735148303	7 Pkt	31 dBm	12.14 V
1735147345	6 Pkt	31 dBm	12.14 V
1735146395	6 Pkt	31 dBm	12.14 V
1735145444	7 Pkt	31 dBm	12.14 V
1735141616	6 Pkt	31 dBm	12.12 V
1735139707	5 Pkt	31 dBm	12.12 V
1735138750	7 Pkt	31 dBm	12.12 V
1735137800	7 Pkt	31 dBm	12.12 V
1735136850	8 Pkt	31 dBm	12.12 V
1735135899	4 Pkt	31 dBm	12.12 V
1735134944	4 Pkt	31 dBm	12.1 V
1735133985	8 Pkt	31 dBm	12.12 V
1735133025	4 Pkt	31 dBm	12.12 V
1735132067	4 Pkt	31 dBm	12.12 V
1735131108	9 Pkt	31 dBm	12.12 V
1735130150	5 Pkt	31 dBm	12.1 V
1735128240	6 Pkt	31 dBm	12.12 V
1735127282	3 Pkt	31 dBm	12.14 V
1735126329	6 Pkt	31 dBm	12.12 V
1735125377	6 Pkt	31 dBm	12.14 V
1735124419	6 Pkt	31 dBm	12.14 V
1735123466	5 Pkt	31 dBm	12.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)