RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YH0DVR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1734953036	25 Pkt	3 Pkt	31 dBm	13.47 V
1734952662	21 Pkt	7 Pkt	31 dBm	13.49 V
1734952289	17 Pkt	8 Pkt	31 dBm	13.49 V
1734951543	23 Pkt	7 Pkt	31 dBm	13.47 V
1734951170	17 Pkt	7 Pkt	31 dBm	13.49 V
1734950796	29 Pkt	6 Pkt	31 dBm	13.49 V
1734950028	19 Pkt	6 Pkt	31 dBm	13.49 V
1734949654	18 Pkt	4 Pkt	31 dBm	13.49 V
1734949281	17 Pkt	8 Pkt	31 dBm	13.49 V
1734948534	23 Pkt	9 Pkt	31 dBm	13.49 V
1734948161	18 Pkt	7 Pkt	31 dBm	13.47 V
1734947788	14 Pkt	6 Pkt	31 dBm	13.49 V
1734947020	25 Pkt	10 Pkt	31 dBm	13.47 V
1734946647	21 Pkt	3 Pkt	31 dBm	13.19 V
1734946273	27 Pkt	4 Pkt	31 dBm	13.47 V
1734945899	24 Pkt	1 Pkt	31 dBm	13.49 V
1734945526	17 Pkt	0 Pkt	31 dBm	13.49 V
1734945154	19 Pkt	0 Pkt	31 dBm	13.49 V
1734944781	23 Pkt	0 Pkt	31 dBm	13.49 V
1734944012	27 Pkt	0 Pkt	31 dBm	13.47 V
1734943639	16 Pkt	0 Pkt	31 dBm	13.49 V
1734943266	20 Pkt	0 Pkt	31 dBm	13.49 V
1734942893	16 Pkt	0 Pkt	31 dBm	13.49 V
1734942521	25 Pkt	0 Pkt	31 dBm	13.49 V
1734942147	22 Pkt	0 Pkt	31 dBm	13.49 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)