RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR9NCI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NCI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*
1734921658	105 Pkt	7 Pkt
1734921047	102 Pkt	3 Pkt
1734920443	98 Pkt	3 Pkt
1734919839	100 Pkt	3 Pkt
1734919235	107 Pkt	7 Pkt
1734918624	88 Pkt	3 Pkt
1734918020	94 Pkt	3 Pkt
1734917416	93 Pkt	4 Pkt
1734916811	112 Pkt	6 Pkt
1734916201	105 Pkt	4 Pkt
1734915596	96 Pkt	2 Pkt
1734914994	108 Pkt	4 Pkt
1734914389	96 Pkt	7 Pkt
1734913778	84 Pkt	3 Pkt
1734913174	104 Pkt	3 Pkt
1734912570	98 Pkt	3 Pkt
1734911966	108 Pkt	7 Pkt
1734911355	77 Pkt	4 Pkt
1734910750	100 Pkt	2 Pkt
1734910147	101 Pkt	4 Pkt
1734909542	101 Pkt	6 Pkt
1734908932	113 Pkt	4 Pkt
1734908327	100 Pkt	2 Pkt
1734907723	89 Pkt	4 Pkt
1734907117	99 Pkt	7 Pkt

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.25, -25

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)