This is the latest recevied telemetry packets stored in our database for station/object 2E1GRY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Sate* | Temp* | Volt* | Alt* | A5* |
---|---|---|---|---|---|
1716032692 | 8 | 29.7 C | 4.06 V | 80 M | 0 |
1716032392 | 8 | 29.4 C | 4.05 V | 80 M | 0 |
1716032092 | 8 | 29.4 C | 4.04 V | 80 M | 0 |
1716031792 | 7 | 29.3 C | 4.04 V | 100 M | 0 |
1716031550 | 5 | 29.2 C | 4.02 V | 80 M | 0 |
1716031250 | 4 | 29.3 C | 4.03 V | 110 M | 0 |
1716030950 | 6 | 29.3 C | 4.01 V | 90 M | 0 |
1716030650 | 6 | 29.2 C | 4.02 V | 100 M | 0 |
1716030350 | 6 | 29.2 C | 3.99 V | 80 M | 0 |
1716030050 | 5 | 29.2 C | 3.99 V | 90 M | 0 |
1716029750 | 5 | 29.2 C | 3.99 V | 90 M | 0 |
1716029450 | 6 | 29.3 C | 3.99 V | 90 M | 0 |
1716029150 | 6 | 29.3 C | 3.99 V | 100 M | 0 |
1716028850 | 6 | 28.7 C | 3.91 V | 80 M | 0 |
1716028550 | 5 | 28.8 C | 3.91 V | 80 M | 0 |
1716028250 | 6 | 28.8 C | 3.93 V | 100 M | 0 |
1716027950 | 6 | 28.8 C | 3.94 V | 90 M | 0 |
1716027650 | 6 | 28.9 C | 3.93 V | 100 M | 0 |
1716027350 | 8 | 28.9 C | 3.93 V | 90 M | 0 |
1716027050 | 8 | 28.9 C | 3.93 V | 90 M | 0 |
1716026750 | 6 | 28.9 C | 3.94 V | 90 M | 0 |
1716026450 | 7 | 28.8 C | 3.95 V | 90 M | 0 |
1716026150 | 6 | 28.8 C | 3.94 V | 90 M | 0 |
1716025850 | 6 | 28.9 C | 3.95 V | 120 M | 0 |
1716025550 | 5 | 28.9 C | 3.96 V | 110 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)