RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU1DNS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU1DNS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1734979718	33 Pkt	-88 dBm	13.68 V
1734977895	43 Pkt	-83 dBm	13.68 V
1734976071	22 Pkt	-83 dBm	13.74 V
1734974249	29 Pkt	-85 dBm	13.66 V
1734972426	22 Pkt	-81 dBm	13.84 V
1734970603	24 Pkt	-79 dBm	14.03 V
1734968781	35 Pkt	-80 dBm	13.9 V
1734966957	39 Pkt	-79 dBm	13.95 V
1734963311	30 Pkt	-80 dBm	13.9 V
1734957842	50 Pkt	-79 dBm	14.17 V
1734956017	42 Pkt	-76 dBm	13.62 V
1734954194	22 Pkt	-75 dBm	13.56 V
1734952370	21 Pkt	-74 dBm	13.54 V
1734950547	18 Pkt	-74 dBm	13.39 V
1734948725	26 Pkt	-74 dBm	13.35 V
1734946901	20 Pkt	-74 dBm	12.9 V
1734945078	31 Pkt	-74 dBm	12.84 V
1734943256	21 Pkt	-74 dBm	12.74 V
1734941433	15 Pkt	-74 dBm	12.76 V
1734939610	13 Pkt	-75 dBm	12.8 V
1734935964	18 Pkt	-75 dBm	12.82 V
1734928673	31 Pkt	-77 dBm	12.86 V
1734926849	18 Pkt	-82 dBm	12.88 V
1734925026	19 Pkt	-83 dBm	12.88 V
1734921381	19 Pkt	-86 dBm	12.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)