RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU4FM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU4FM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1736523920	10 Pkt	4 Pkt	-51 dBm	11.81 V
1736522098	3 Pkt	0 Pkt	-43 dBm	11.92 V
1736520276	2 Pkt	0 Pkt	-48 dBm	11.92 V
1736518453	0 Pkt	0 Pkt	-45 dBm	11.89 V
1736516631	0 Pkt	0 Pkt	-44 dBm	11.77 V
1736514809	0 Pkt	0 Pkt	-44 dBm	11.89 V
1736512987	0 Pkt	1 Pkt	-43 dBm	11.89 V
1736511165	2 Pkt	0 Pkt	-53 dBm	11.81 V
1736509343	5 Pkt	0 Pkt	-45 dBm	11.89 V
1736507519	4 Pkt	0 Pkt	-46 dBm	11.92 V
1736505696	5 Pkt	0 Pkt	-54 dBm	11.92 V
1736503874	8 Pkt	0 Pkt	-42 dBm	11.92 V
1736502048	9 Pkt	0 Pkt	-52 dBm	11.92 V
1736500223	3 Pkt	0 Pkt	-53 dBm	11.81 V
1736498399	6 Pkt	0 Pkt	-44 dBm	11.81 V
1736496576	5 Pkt	0 Pkt	-52 dBm	11.92 V
1736494752	9 Pkt	1 Pkt	-43 dBm	11.92 V
1736492927	13 Pkt	0 Pkt	-44 dBm	11.92 V
1736491101	11 Pkt	0 Pkt	-43 dBm	11.89 V
1736489278	11 Pkt	0 Pkt	-52 dBm	11.89 V
1736487454	8 Pkt	0 Pkt	-51 dBm	11.89 V
1736485631	3 Pkt	0 Pkt	-43 dBm	11.89 V
1736483808	4 Pkt	1 Pkt	-43 dBm	11.89 V
1736481986	3 Pkt	3 Pkt	-52 dBm	11.89 V
1736480163	3 Pkt	5 Pkt	-45 dBm	11.89 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)