RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS4YYZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4YYZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1734940198	0 Pkt	-62 dBm	4.43 V
1734939182	0 Pkt	-62 dBm	4.43 V
1734938170	0 Pkt	-62 dBm	4.43 V
1734937150	0 Pkt	-62 dBm	4.43 V
1734936134	0 Pkt	-63 dBm	4.43 V
1734930037	5 Pkt	-61 dBm	4.43 V
1734929020	0 Pkt	-61 dBm	4.39 V
1734928008	0 Pkt	-61 dBm	4.43 V
1734926988	0 Pkt	-62 dBm	4.39 V
1734925972	0 Pkt	-61 dBm	4.43 V
1734924956	1 Pkt	-60 dBm	4.39 V
1734923940	0 Pkt	-60 dBm	4.39 V
1734922925	1 Pkt	-60 dBm	4.39 V
1734921922	1 Pkt	-61 dBm	4.39 V
1734920891	2 Pkt	-61 dBm	4.39 V
1734919874	0 Pkt	-61 dBm	4.39 V
1734918858	0 Pkt	-61 dBm	4.39 V
1734917842	0 Pkt	-61 dBm	4.39 V
1734916827	0 Pkt	-61 dBm	4.39 V
1734915810	1 Pkt	-62 dBm	4.39 V
1734914794	0 Pkt	-63 dBm	4.39 V
1734913778	0 Pkt	-62 dBm	4.39 V
1734912761	0 Pkt	-59 dBm	4.39 V
1734911745	0 Pkt	-59 dBm	4.39 V
1734910729	0 Pkt	-62 dBm	4.39 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)