This is the latest recevied telemetry packets stored in our database for station/object OE5MAO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1719994404 | 0 hPa | 0 C deg | 0 % | 0 hPa | 20 C deg |
1719992604 | 0 hPa | 0 C deg | 0 % | 0 hPa | 20.2 C deg |
1719990803 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719990345 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719988545 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.2 C deg |
1719986745 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.2 C deg |
1719984944 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.3 C deg |
1719983144 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719981344 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719979544 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.3 C deg |
1719977744 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.3 C deg |
1719975943 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.2 C deg |
1719974143 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719972343 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719970543 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719968743 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719966943 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.5 C deg |
1719965143 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719963343 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719961543 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719959743 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.4 C deg |
1719957943 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.3 C deg |
1719956142 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.2 C deg |
1719954342 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.2 C deg |
1719952541 | 0 hPa | 0 C deg | 0 % | 0 hPa | 21.1 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)