RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU2DKV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DKV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734916650	1 Pkt	0 Pkt	-56 dBm	13.17 V
1734914827	2 Pkt	0 Pkt	-60 dBm	13.25 V
1734913005	1 Pkt	0 Pkt	-57 dBm	13.29 V
1734911183	2 Pkt	0 Pkt	-57 dBm	13.17 V
1734909361	1 Pkt	0 Pkt	-58 dBm	13.47 V
1734907539	1 Pkt	0 Pkt	-56 dBm	13.37 V
1734905717	1 Pkt	0 Pkt	-57 dBm	13.21 V
1734903895	0 Pkt	0 Pkt	-58 dBm	13.04 V
1734902003	1 Pkt	0 Pkt	-57 dBm	13.31 V
1734900181	2 Pkt	0 Pkt	-56 dBm	13.15 V
1734898773	1 Pkt	0 Pkt	-58 dBm	13.33 V
1734896537	2 Pkt	0 Pkt	-57 dBm	12.67 V
1734894715	1 Pkt	0 Pkt	-54 dBm	12.51 V
1734892892	2 Pkt	0 Pkt	-56 dBm	12.61 V
1734891071	1 Pkt	0 Pkt	-57 dBm	13.1 V
1734889248	2 Pkt	0 Pkt	-59 dBm	12.76 V
1734887426	1 Pkt	1 Pkt	-60 dBm	12.65 V
1734885604	2 Pkt	0 Pkt	-62 dBm	13.56 V
1734883782	1 Pkt	0 Pkt	-60 dBm	13.19 V
1734881960	2 Pkt	0 Pkt	-61 dBm	13.43 V
1734880142	1 Pkt	1 Pkt	-60 dBm	13.1 V
1734878316	2 Pkt	0 Pkt	-62 dBm	12.88 V
1734876494	1 Pkt	0 Pkt	-61 dBm	13.62 V
1734874672	2 Pkt	0 Pkt	-61 dBm	13.39 V
1734872849	1 Pkt	0 Pkt	-61 dBm	13.47 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)