This is the latest recevied telemetry packets stored in our database for station/object LU8JDZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719632766 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 9.35 V |
1719630943 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 9.8 V |
1719629119 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 10.34 V |
1719627296 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 10.17 V |
1719625473 | 0 Pkt | 1 Pkt | 0 Pkt | -51 dBm | 9.7 V |
1719623648 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 9.56 V |
1719621824 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 9.21 V |
1719620001 | 0 Pkt | 1 Pkt | 0 Pkt | -46 dBm | 8.8 V |
1719618177 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 8.94 V |
1719616729 | 0 Pkt | 0 Pkt | 0 Pkt | -57 dBm | 9.37 V |
1719614906 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 9 V |
1719613083 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 9.86 V |
1719611260 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 9.8 V |
1719609438 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 9.27 V |
1719607613 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 9.54 V |
1719605790 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 9.47 V |
1719603967 | 0 Pkt | 2 Pkt | 0 Pkt | -50 dBm | 10.58 V |
1719602143 | 0 Pkt | 1 Pkt | 0 Pkt | -42 dBm | 9.8 V |
1719600319 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 9.35 V |
1719598496 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 9.88 V |
1719596673 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 9.7 V |
1719594850 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 9.95 V |
1719593026 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 10.21 V |
1719591203 | 0 Pkt | 1 Pkt | 0 Pkt | -40 dBm | 9.39 V |
1719589378 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 9.97 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)