This is the latest recevied telemetry packets stored in our database for station/object IZ5MMH-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734980269 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734979669 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734979069 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734978469 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734977869 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734977269 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734976669 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734976069 | -80 dbm | 3.45 V | 0 | 0 | 0 |
| 1734975469 | -82 dbm | 3.45 V | 0 | 0 | 0 |
| 1734974869 | -79 dbm | 3.45 V | 0 | 0 | 0 |
| 1734974269 | -79 dbm | 3.46 V | 0 | 0 | 0 |
| 1734973669 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734973069 | -82 dbm | 3.45 V | 0 | 0 | 0 |
| 1734972469 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734971870 | -81 dbm | 3.46 V | 0 | 0 | 0 |
| 1734971270 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734970669 | -80 dbm | 3.46 V | 0 | 0 | 0 |
| 1734970069 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734969469 | -82 dbm | 3.46 V | 0 | 0 | 0 |
| 1734968869 | -79 dbm | 3.45 V | 0 | 0 | 0 |
| 1734968269 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734967669 | -82 dbm | 3.45 V | 0 | 0 | 0 |
| 1734967069 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734966469 | -81 dbm | 3.45 V | 0 | 0 | 0 |
| 1734965869 | -81 dbm | 3.46 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)