RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9W2CJD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2CJD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RSSI*	Voltage*
1735005872	-59 dBm	8.06 V
1735004051	-54 dBm	8.06 V
1735002229	-63 dBm	8.08 V
1735000406	-54 dBm	8.06 V
1734998584	-53 dBm	8.06 V
1734996762	-52 dBm	7.9 V
1734994940	-54 dBm	7.9 V
1734993118	-50 dBm	7.92 V
1734991296	-50 dBm	7.92 V
1734989474	-52 dBm	7.92 V
1734987652	-55 dBm	7.92 V
1734985830	-57 dBm	8.06 V
1734984008	-56 dBm	8.06 V
1734982186	-57 dBm	8.06 V
1734980364	-57 dBm	8.06 V
1734978542	-58 dBm	8.06 V
1734976720	-57 dBm	8.06 V
1734974898	-59 dBm	8.06 V
1734973076	-59 dBm	8.06 V
1734971254	-61 dBm	8.06 V
1734969432	-52 dBm	7.92 V
1734967610	-53 dBm	8.06 V
1734965788	-56 dBm	8.06 V
1734963966	-54 dBm	8.06 V
1734962144	-56 dBm	8.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)