This is the latest recevied telemetry packets stored in our database for station/object N8LPQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719396503 | 77 | 94 | 255 | 178 | 137 |
1719392907 | 77 | 94 | 255 | 178 | 137 |
1719389311 | 77 | 95 | 255 | 178 | 136 |
1719385715 | 77 | 95 | 255 | 178 | 136 |
1719382117 | 77 | 95 | 255 | 178 | 136 |
1719378521 | 77 | 95 | 255 | 177 | 136 |
1719374925 | 77 | 95 | 255 | 177 | 136 |
1719371328 | 77 | 95 | 255 | 178 | 136 |
1719367732 | 77 | 95 | 255 | 178 | 136 |
1719364136 | 77 | 95 | 255 | 177 | 136 |
1719360541 | 77 | 94 | 255 | 178 | 137 |
1719357272 | 78 | 85 | 255 | 182 | 143 |
1719352822 | 77 | 94 | 255 | 178 | 137 |
1719349226 | 77 | 94 | 255 | 178 | 137 |
1719345630 | 77 | 94 | 255 | 178 | 137 |
1719342033 | 77 | 94 | 255 | 178 | 136 |
1719338437 | 77 | 95 | 255 | 178 | 137 |
1719334841 | 77 | 95 | 255 | 178 | 136 |
1719331245 | 77 | 95 | 255 | 178 | 136 |
1719327648 | 77 | 95 | 255 | 178 | 136 |
1719324052 | 77 | 96 | 255 | 177 | 136 |
1719320456 | 77 | 96 | 255 | 177 | 136 |
1719316859 | 77 | 96 | 255 | 177 | 136 |
1719313263 | 77 | 96 | 255 | 177 | 136 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)