RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR9NRA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NRA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Vbatt*
1734903208	33 Pkt	1 Pkt	1 Pkt	10 V
1734902608	50 Pkt	1 Pkt	0 Pkt	10 V
1734902008	50 Pkt	4 Pkt	0 Pkt	10 V
1734901399	42 Pkt	0 Pkt	0 Pkt	10 V
1734900800	38 Pkt	0 Pkt	0 Pkt	10 V
1734900200	39 Pkt	1 Pkt	1 Pkt	10 V
1734899600	39 Pkt	0 Pkt	0 Pkt	10 V
1734899000	61 Pkt	1 Pkt	1 Pkt	10 V
1734897800	39 Pkt	1 Pkt	0 Pkt	10 V
1734897201	50 Pkt	0 Pkt	0 Pkt	10 V
1734896601	46 Pkt	0 Pkt	0 Pkt	10 V
1734896001	54 Pkt	0 Pkt	0 Pkt	10 V
1734895401	39 Pkt	0 Pkt	0 Pkt	10 V
1734894801	32 Pkt	0 Pkt	0 Pkt	10 V
1734894201	42 Pkt	0 Pkt	0 Pkt	10 V
1734893601	44 Pkt	0 Pkt	0 Pkt	10 V
1734893002	32 Pkt	5 Pkt	0 Pkt	10 V
1734892390	56 Pkt	0 Pkt	0 Pkt	10 V
1734891790	57 Pkt	0 Pkt	0 Pkt	10 V
1734891191	38 Pkt	0 Pkt	0 Pkt	10 V
1734890591	42 Pkt	1 Pkt	1 Pkt	10 V
1734889991	60 Pkt	0 Pkt	0 Pkt	10 V
1734889391	30 Pkt	0 Pkt	0 Pkt	10 V
1734888791	22 Pkt	0 Pkt	0 Pkt	10 V
1734888191	28 Pkt	1 Pkt	0 Pkt	10 V

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

Vbatt: 0, 0.02, 10

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)