This is the latest recevied telemetry packets stored in our database for station/object DG2SAX-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1719679551 | 905.5 hPa | 23.1 C deg | 65.7 % | 1011.9 hPa | 26.9 C deg |
1719677751 | 905.8 hPa | 23 C deg | 65.3 % | 1012.2 hPa | 27.1 C deg |
1719675951 | 906.1 hPa | 23 C deg | 64.6 % | 1012.7 hPa | 27.6 C deg |
1719674161 | 906.7 hPa | 23 C deg | 64.3 % | 1013.3 hPa | 26.8 C deg |
1719672351 | 907 hPa | 22.9 C deg | 64 % | 1013.7 hPa | 26.9 C deg |
1719670555 | 907.5 hPa | 22.9 C deg | 63.8 % | 1014.2 hPa | 27.1 C deg |
1719668750 | 907.6 hPa | 22.8 C deg | 63.7 % | 1014.4 hPa | 27.7 C deg |
1719666951 | 907.8 hPa | 22.8 C deg | 63.6 % | 1014.6 hPa | 27.1 C deg |
1719665157 | 908.1 hPa | 22.8 C deg | 64.1 % | 1014.9 hPa | 28.2 C deg |
1719663350 | 908.2 hPa | 22.8 C deg | 64.3 % | 1015 hPa | 26.4 C deg |
1719661550 | 908.5 hPa | 22.8 C deg | 64.6 % | 1015.3 hPa | 26.4 C deg |
1719659755 | 908.8 hPa | 22.8 C deg | 64.4 % | 1015.7 hPa | 26.5 C deg |
1719657960 | 909.2 hPa | 22.6 C deg | 65.8 % | 1016.2 hPa | 26.6 C deg |
1719657734 | 0 hPa | 0 C deg | 0 % | 0 hPa | 26.5 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)