This is the latest recevied telemetry packets stored in our database for station/object SP9SOY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | uSv/h* | TVOC* | CO2* | UV* | IR* |
|---|---|---|---|---|---|
| 1734913695 | 14 Radiation [uSv/h] | 4 TVOC[ppb] | 42800 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734904700 | 13 Radiation [uSv/h] | 5 TVOC[ppb] | 44300 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734901101 | 15 Radiation [uSv/h] | 3 TVOC[ppb] | 42300 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734895697 | 15 Radiation [uSv/h] | 3 TVOC[ppb] | 42300 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734892699 | 14 Radiation [uSv/h] | 1 TVOC[ppb] | 43400 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734888501 | 14 Radiation [uSv/h] | 1 TVOC[ppb] | 43400 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734886697 | 16 Radiation [uSv/h] | 1 TVOC[ppb] | 43400 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
| 1734861018 | 12 Radiation [uSv/h] | 5 TVOC[ppb] | 44600 CO2[ppm] | 0 UV-B/C[uW/cm^2] | 0 IR[uW/cm^2] |
*Used Equation Coefficients:
uSv/h: 0, 1, 0
TVOC: 0, 1, 0
CO2: 0, 100, 0
UV: 0, 1, 0
IR: 0, 100, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)