This is the latest recevied telemetry packets stored in our database for station/object AE5PL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load1* | Load5* | Ld15* | Value5* |
|---|---|---|---|---|---|
| 1734917110 | 40 deg.C | 0 tot.% | 1 tot.% | 0 tot.% | 0 |
| 1734916510 | 40 deg.C | 0 tot.% | 1 tot.% | 0 tot.% | 0 |
| 1734915910 | 40 deg.C | 1 tot.% | 1 tot.% | 0 tot.% | 0 |
| 1734915310 | 40 deg.C | 0 tot.% | 1 tot.% | 0 tot.% | 0 |
| 1734914710 | 40 deg.C | 0 tot.% | 0 tot.% | 0 tot.% | 0 |
| 1734914110 | 40 deg.C | 5 tot.% | 3 tot.% | 1 tot.% | 0 |
| 1734913510 | 40 deg.C | 3 tot.% | 2 tot.% | 0 tot.% | 0 |
| 1734912910 | 40 deg.C | 0 tot.% | 0 tot.% | 0 tot.% | 0 |
| 1734912310 | 40 deg.C | 2 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734911710 | 41 deg.C | 1 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734911110 | 41 deg.C | 2 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734910510 | 41 deg.C | 1 tot.% | 1 tot.% | 0 tot.% | 0 |
| 1734909910 | 41 deg.C | 2 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734909310 | 41 deg.C | 0 tot.% | 0 tot.% | 0 tot.% | 0 |
| 1734908710 | 41 deg.C | 1 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1734908110 | 41 deg.C | 1 tot.% | 0 tot.% | 0 tot.% | 0 |
| 1734907510 | 41 deg.C | 3 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1734906910 | 41 deg.C | 1 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1734906310 | 41 deg.C | 2 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734905710 | 41 deg.C | 3 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734905110 | 41 deg.C | 1 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1734904510 | 41 deg.C | 1 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1734903910 | 41 deg.C | 3 tot.% | 3 tot.% | 1 tot.% | 0 |
| 1734903310 | 41 deg.C | 0 tot.% | 0 tot.% | 0 tot.% | 0 |
| 1734902710 | 41 deg.C | 0 tot.% | 1 tot.% | 0 tot.% | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Load1: 0, 1, 0
Load5: 0, 1, 0
Ld15: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)