RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

N1DTA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1DTA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734916548	15.83 Volt	760 Pkt	280 Pkt	74 Pcnt
1734916546	15.83 Volt	760 Pkt	280 Pkt	74 Pcnt
1734916246	15.6 Volt	810 Pkt	280 Pkt	76 Pcnt
1734915949	15.68 Volt	820 Pkt	280 Pkt	77 Pcnt
1734915946	15.68 Volt	820 Pkt	280 Pkt	77 Pcnt
1734915646	15.75 Volt	850 Pkt	280 Pkt	78 Pcnt
1734915349	15.53 Volt	810 Pkt	280 Pkt	79 Pcnt
1734915346	15.53 Volt	810 Pkt	280 Pkt	79 Pcnt
1734915046	15.68 Volt	840 Pkt	280 Pkt	80 Pcnt
1734914749	15.6 Volt	820 Pkt	290 Pkt	80 Pcnt
1734914746	15.6 Volt	820 Pkt	290 Pkt	80 Pcnt
1734914446	15.6 Volt	830 Pkt	280 Pkt	81 Pcnt
1734914147	15.53 Volt	840 Pkt	280 Pkt	82 Pcnt
1734914146	15.53 Volt	840 Pkt	280 Pkt	82 Pcnt
1734913846	15.6 Volt	870 Pkt	290 Pkt	82 Pcnt
1734913557	15.53 Volt	860 Pkt	290 Pkt	80 Pcnt
1734913546	15.53 Volt	860 Pkt	290 Pkt	80 Pcnt
1734913246	15.6 Volt	870 Pkt	290 Pkt	79 Pcnt
1734912947	15.53 Volt	840 Pkt	290 Pkt	78 Pcnt
1734912946	15.53 Volt	840 Pkt	290 Pkt	78 Pcnt
1734912646	15.53 Volt	810 Pkt	280 Pkt	77 Pcnt
1734912347	15.68 Volt	780 Pkt	270 Pkt	76 Pcnt
1734912346	15.68 Volt	780 Pkt	270 Pkt	76 Pcnt
1734912046	15.68 Volt	780 Pkt	270 Pkt	76 Pcnt
1734911747	15.53 Volt	770 Pkt	270 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)