RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YO8A-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO8A-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp_Procesor*	Temp_int*	Temp_ext*	None*
1734953471	42.8 C	31.9 C	-1.6 C	0 C
1734952871	43.3 C	33.1 C	-1.6 C	0 C
1734952271	43.9 C	33.1 C	-1.6 C	439 C
1734951674	44.4 C	33.4 C	-2.3 C	0 C
1734951071	43.9 C	33.4 C	-2.3 C	0 C
1734950471	44.4 C	32.3 C	-2.3 C	0 C
1734949871	43.3 C	32.3 C	-2.3 C	0 C
1734949271	43.3 C	32.3 C	-2.3 C	0 C
1734948671	42.8 C	31.1 C	-2.3 C	0 C
1734948074	41.7 C	31.1 C	-2.3 C	0 C
1734947471	41.2 C	30.4 C	-2.3 C	0 C
1734946871	40.1 C	29.7 C	-2.3 C	0 C
1734946271	40.1 C	28.8 C	-2.3 C	0 C
1734945671	39 C	26.1 C	-2.3 C	0 C
1734945071	38.5 C	26.1 C	-2.3 C	0 C
1734944474	36.9 C	25.2 C	-2.3 C	0 C
1734943871	35.8 C	25.2 C	-2.3 C	0 C
1734943271	34.7 C	24.3 C	-2.3 C	0 C
1734942671	34.7 C	23.6 C	-2.3 C	0 C
1734942072	33.6 C	22.8 C	-2.3 C	0 C
1734941471	33.1 C	21.7 C	-2.3 C	0 C
1734940874	33.6 C	21.7 C	-2.3 C	0 C
1734940271	32 C	20.9 C	-2.3 C	0 C
1734939671	32 C	20.9 C	-2.3 C	320 C
1734939071	31.5 C	20.9 C	-4.1 C	0 C

*Used Equation Coefficients:

Temp_Procesor: 0, 0.1, 0

Temp_int: 0, 0.1, 0

Temp_ext: 0, 0.1, 0

None: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)