This is the latest recevied telemetry packets stored in our database for station/object 9A2KS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1719632491 | 12.8 Volt | 1290 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1719630704 | 12.8 Volt | 1250 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1719629788 | 12.8 Volt | 1250 Pkt | 0 Pkt | 71 Pcnt | 0 None |
1719628887 | 12.8 Volt | 1170 Pkt | 0 Pkt | 70 Pcnt | 0 None |
1719627986 | 12.8 Volt | 1030 Pkt | 0 Pkt | 65 Pcnt | 0 None |
1719627085 | 12.8 Volt | 960 Pkt | 0 Pkt | 64 Pcnt | 0 None |
1719626185 | 12.8 Volt | 880 Pkt | 0 Pkt | 61 Pcnt | 0 None |
1719625284 | 12.8 Volt | 890 Pkt | 0 Pkt | 61 Pcnt | 0 None |
1719624383 | 12.8 Volt | 990 Pkt | 0 Pkt | 64 Pcnt | 0 None |
1719623482 | 12.8 Volt | 1050 Pkt | 0 Pkt | 65 Pcnt | 0 None |
1719622581 | 12.8 Volt | 1130 Pkt | 0 Pkt | 67 Pcnt | 0 None |
1719621680 | 12.8 Volt | 1150 Pkt | 0 Pkt | 67 Pcnt | 0 None |
1719620779 | 12.8 Volt | 1110 Pkt | 0 Pkt | 67 Pcnt | 0 None |
1719619878 | 12.8 Volt | 1030 Pkt | 0 Pkt | 64 Pcnt | 0 None |
1719618978 | 12.8 Volt | 980 Pkt | 0 Pkt | 62 Pcnt | 0 None |
1719618077 | 12.8 Volt | 960 Pkt | 0 Pkt | 62 Pcnt | 0 None |
1719617176 | 12.8 Volt | 970 Pkt | 0 Pkt | 60 Pcnt | 0 None |
1719616275 | 12.8 Volt | 990 Pkt | 0 Pkt | 61 Pcnt | 0 None |
1719615374 | 12.8 Volt | 950 Pkt | 0 Pkt | 59 Pcnt | 0 None |
1719614473 | 12.8 Volt | 860 Pkt | 0 Pkt | 55 Pcnt | 0 None |
1719613572 | 12.8 Volt | 790 Pkt | 0 Pkt | 53 Pcnt | 0 None |
1719612671 | 12.8 Volt | 720 Pkt | 0 Pkt | 49 Pcnt | 0 None |
1719611771 | 12.8 Volt | 690 Pkt | 0 Pkt | 50 Pcnt | 0 None |
1719610870 | 12.8 Volt | 750 Pkt | 0 Pkt | 52 Pcnt | 0 None |
1719609969 | 12.8 Volt | 830 Pkt | 0 Pkt | 55 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)