This is the latest recevied telemetry packets stored in our database for station/object BLUCPT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719976267 | 491 | 624 | 0 | 0 | 0 |
1719976086 | 490 | 625 | 0 | 0 | 0 |
1719975906 | 491 | 626 | 0 | 0 | 0 |
1719975725 | 491 | 626 | 0 | 0 | 0 |
1719975544 | 491 | 627 | 0 | 0 | 0 |
1719975363 | 491 | 627 | 0 | 0 | 0 |
1719975183 | 491 | 627 | 0 | 0 | 0 |
1719975002 | 491 | 627 | 0 | 0 | 0 |
1719974821 | 490 | 627 | 0 | 0 | 0 |
1719974640 | 491 | 627 | 0 | 0 | 0 |
1719974460 | 491 | 627 | 0 | 0 | 0 |
1719974279 | 491 | 627 | 0 | 0 | 0 |
1719974098 | 490 | 628 | 0 | 0 | 0 |
1719973918 | 491 | 628 | 0 | 0 | 0 |
1719973737 | 491 | 629 | 0 | 0 | 0 |
1719973556 | 490 | 629 | 0 | 0 | 0 |
1719973375 | 490 | 631 | 0 | 0 | 0 |
1719973194 | 491 | 632 | 0 | 0 | 0 |
1719973014 | 491 | 634 | 0 | 0 | 0 |
1719972833 | 491 | 637 | 0 | 0 | 0 |
1719972652 | 491 | 638 | 0 | 0 | 0 |
1719972471 | 491 | 640 | 0 | 0 | 0 |
1719972290 | 491 | 642 | 0 | 0 | 0 |
1719972109 | 491 | 643 | 0 | 0 | 0 |
1719971928 | 491 | 644 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)