RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

CALGRY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CALGRY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg10m*	Shack*	VDC*	VAC*
1734901389	360 Pkt	36 Pkt	6.5 C	13.3 Volts	123.5 Volts
1734900069	260 Pkt	42 Pkt	6.5 C	13.3 Volts	123.5 Volts
1734899409	220 Pkt	35 Pkt	6.5 C	13.3 Volts	123.5 Volts
1734898089	180 Pkt	30 Pkt	6.5 C	13.3 Volts	123.5 Volts
1734897429	170 Pkt	15 Pkt	6 C	13.3 Volts	123.5 Volts
1734896769	170 Pkt	16 Pkt	6.5 C	13.3 Volts	123.5 Volts
1734896109	170 Pkt	23 Pkt	6.5 C	13.3 Volts	123.5 Volts
1734895449	160 Pkt	18 Pkt	6 C	13.3 Volts	123.5 Volts
1734894789	140 Pkt	14 Pkt	6 C	13.3 Volts	123.5 Volts
1734894129	160 Pkt	19 Pkt	6 C	11.9 Volts	122.55 Volts
1734893469	150 Pkt	12 Pkt	6 C	13.3 Volts	123.5 Volts
1734892809	150 Pkt	19 Pkt	6 C	13.3 Volts	123.5 Volts
1734892149	160 Pkt	12 Pkt	6 C	13.3 Volts	123.5 Volts
1734891489	180 Pkt	14 Pkt	6 C	13.3 Volts	123.5 Volts
1734890829	190 Pkt	21 Pkt	6 C	13.3 Volts	123.5 Volts
1734890169	180 Pkt	13 Pkt	6 C	13.3 Volts	123.5 Volts
1734889509	240 Pkt	19 Pkt	6 C	13.3 Volts	123.5 Volts
1734888849	260 Pkt	22 Pkt	6 C	13.3 Volts	123.5 Volts
1734888189	240 Pkt	22 Pkt	6 C	13.3 Volts	123.5 Volts
1734887529	230 Pkt	18 Pkt	6 C	13.3 Volts	123.5 Volts
1734886869	220 Pkt	24 Pkt	6 C	13.2 Volts	122.55 Volts
1734886210	200 Pkt	43 Pkt	6 C	13.3 Volts	122.55 Volts
1734885550	140 Pkt	20 Pkt	6 C	13.3 Volts	122.55 Volts
1734884890	140 Pkt	13 Pkt	6 C	13.3 Volts	123.5 Volts
1734884230	130 Pkt	9 Pkt	6 C	11.8 Volts	122.55 Volts

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Shack: 0, 0.5, -64

VDC: 0, 0.1, 0

VAC: 0, 0.95, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)