RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

N9PBD-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N9PBD-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx10m*	Dg1h*	Eff1h*	Temp*
1734928434	14.18 Volt	24 Pkt	50 Pkt	64 Pcnt	-64 C
1734924833	14.18 Volt	20 Pkt	60 Pkt	61 Pcnt	-64 C
1734921229	14.18 Volt	19 Pkt	60 Pkt	56 Pcnt	-64 C
1734917626	14.18 Volt	16 Pkt	60 Pkt	58 Pcnt	-64 C
1734906814	14.03 Volt	22 Pkt	80 Pkt	63 Pcnt	-64 C
1734903210	14.18 Volt	23 Pkt	100 Pkt	65 Pcnt	-64 C
1734899607	14.18 Volt	20 Pkt	90 Pkt	64 Pcnt	-64 C
1734896003	14.18 Volt	20 Pkt	90 Pkt	63 Pcnt	-64 C
1734892400	14.18 Volt	25 Pkt	120 Pkt	61 Pcnt	-64 C
1734888797	14.18 Volt	19 Pkt	90 Pkt	60 Pcnt	-64 C
1734885193	14.18 Volt	20 Pkt	70 Pkt	72 Pcnt	-64 C
1734881590	14.18 Volt	30 Pkt	80 Pkt	81 Pcnt	-64 C
1734877986	14.18 Volt	39 Pkt	80 Pkt	90 Pcnt	-64 C
1734874383	14.18 Volt	35 Pkt	80 Pkt	89 Pcnt	-64 C
1734870779	14.18 Volt	37 Pkt	100 Pkt	92 Pcnt	-64 C
1734867176	14.18 Volt	36 Pkt	80 Pkt	89 Pcnt	-64 C
1734863573	14.18 Volt	31 Pkt	70 Pkt	89 Pcnt	-64 C
1734859969	14.18 Volt	34 Pkt	70 Pkt	92 Pcnt	-64 C
1734856366	14.18 Volt	33 Pkt	80 Pkt	88 Pcnt	-64 C
1734852762	14.18 Volt	35 Pkt	80 Pkt	91 Pcnt	-64 C
1734849159	14.18 Volt	40 Pkt	110 Pkt	89 Pcnt	-64 C
1734845556	14.18 Volt	37 Pkt	100 Pkt	82 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)