RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BM3FFG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM3FFG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1734954742	27.7 C	18 p	54 p	1672 p
1734953541	26.8 C	18 p	49 p	1666 p
1734952342	26.4 C	18 p	47 p	1666 p
1734951142	26.4 C	13 p	74 p	1655 p
1734949942	27.4 C	16 p	88 p	1650 p
1734948742	26.6 C	44 p	101 p	1650 p
1734947542	26.8 C	27 p	74 p	1616 p
1734946342	25.8 C	29 p	83 p	1602 p
1734945142	26.4 C	18 p	96 p	1597 p
1734943942	27 C	36 p	111 p	1592 p
1734942742	25.9 C	42 p	129 p	1573 p
1734941541	26.2 C	33 p	157 p	1557 p
1734940342	27.3 C	54 p	148 p	1553 p
1734939142	26.8 C	70 p	115 p	1543 p
1734937941	27.9 C	24 p	72 p	1498 p
1734936742	27.4 C	21 p	73 p	1505 p
1734929542	27.5 C	24 p	91 p	1457 p
1734928342	26.3 C	29 p	79 p	1449 p
1734927141	27.3 C	38 p	72 p	1440 p
1734925942	26.3 C	12 p	54 p	1449 p
1734924741	27 C	22 p	57 p	1453 p
1734923541	26 C	20 p	50 p	1446 p
1734921142	26.5 C	15 p	66 p	1444 p
1734919942	25.2 C	32 p	112 p	1446 p
1734918741	26.3 C	19 p	126 p	1429 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)