This is the latest recevied telemetry packets stored in our database for station/object YC3CZV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1734980452 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734979529 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734978605 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734977682 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734976758 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734975835 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734971218 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734970293 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734968447 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0 V |
| 1734967524 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734966600 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734965678 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734964754 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734963831 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734962908 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734961985 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734961062 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734960139 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734959216 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734958293 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1734957370 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734956446 | 2 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734955522 | 1 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734954598 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1734953675 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)