This is the latest recevied telemetry packets stored in our database for station/object YM7KO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | AKU* | PANEL* | WIND* | TEMP* | RX* |
|---|---|---|---|---|---|
| 1735005194 | 14.18 V. | 0 V. | 0 V. | 21 C. | 83 Pkt |
| 1735004894 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 84 Pkt |
| 1735004594 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 69 Pkt |
| 1735004294 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 81 Pkt |
| 1735003994 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 87 Pkt |
| 1735003694 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 95 Pkt |
| 1735003394 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 99 Pkt |
| 1735003094 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 85 Pkt |
| 1735002794 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 83 Pkt |
| 1735002494 | 14.25 V. | 0 V. | 0 V. | 21 C. | 104 Pkt |
| 1735002194 | 14.33 V. | 0 V. | 0 V. | 21 C. | 96 Pkt |
| 1735001894 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 69 Pkt |
| 1735001594 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 95 Pkt |
| 1735001294 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 107 Pkt |
| 1735000994 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 83 Pkt |
| 1735000694 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 86 Pkt |
| 1735000394 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 121 Pkt |
| 1735000094 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 105 Pkt |
| 1734999794 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 88 Pkt |
| 1734999494 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 86 Pkt |
| 1734999194 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 96 Pkt |
| 1734998894 | 14.33 V. | 0 V. | 0 V. | 21.5 C. | 125 Pkt |
| 1734998595 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 134 Pkt |
| 1734998294 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 136 Pkt |
| 1734997994 | 14.25 V. | 0 V. | 0 V. | 21.5 C. | 104 Pkt |
*Used Equation Coefficients:
AKU: 0, 0.075, 0
PANEL: 0, 0.2, 0
WIND: 0, 0.2, 0
TEMP: 0, 0.5, -64
RX: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)