This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734900903 | 1294 | 81.2 | 44 | 71.7 | 0 |
| 1734900002 | 1303 | 80.7 | 43.5 | 71.9 | 0 |
| 1734899101 | 1330 | 80.2 | 42.9 | 70.9 | 0 |
| 1734897304 | 1349 | 80.3 | 42.9 | 72.4 | 0 |
| 1734896402 | 1347 | 77.8 | 42.4 | 71.6 | 0 |
| 1734895502 | 1362 | 75.6 | 40.8 | 69.1 | 0 |
| 1734894602 | 1354 | 74.1 | 40.2 | 66.1 | 0 |
| 1734893702 | 1392 | 73.6 | 39.7 | 64.7 | 0 |
| 1734892802 | 1396 | 72.8 | 38.6 | 65.6 | 0 |
| 1734891902 | 1396 | 70.5 | 37.6 | 64.7 | 0 |
| 1734891001 | 1311 | 67.6 | 37 | 61.2 | 0 |
| 1734890102 | 1344 | 65.9 | 35.4 | 58.2 | 0 |
| 1734889201 | 1315 | 64.4 | 34.3 | 56.5 | 0 |
| 1734888301 | 1375 | 63.2 | 34.3 | 55 | 0 |
| 1734887401 | 1347 | 62.7 | 33.8 | 54.2 | 0 |
| 1734886503 | 1336 | 62.2 | 33.8 | 53.7 | 0 |
| 1734885601 | 1333 | 61.5 | 33.2 | 53.3 | 0 |
| 1734884703 | 1327 | 61.5 | 32.7 | 52.8 | 0 |
| 1734883801 | 1360 | 60.9 | 32.7 | 52.2 | 0 |
| 1734882903 | 1343 | 60.7 | 32.2 | 51.9 | 0 |
| 1734882001 | 1349 | 60.4 | 32.2 | 51.5 | 0 |
| 1734881108 | 1354 | 60.5 | 32.2 | 51.4 | 0 |
| 1734880201 | 1346 | 60.2 | 32.7 | 51.1 | 0 |
| 1734879302 | 1373 | 60.1 | 32.2 | 51 | 0 |
| 1734878401 | 1346 | 60.1 | 32.2 | 51 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)