This is the latest recevied telemetry packets stored in our database for station/object N3EG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1730419303 | 132 | 79 | 33 | 16 | 75 |
1730417503 | 132 | 76 | 32 | 15 | 75 |
1730415702 | 133 | 74 | 31 | 15 | 75 |
1730388187 | 133 | 79 | 33 | 16 | 75 |
1730386388 | 132 | 79 | 33 | 16 | 75 |
1730384587 | 133 | 79 | 33 | 16 | 75 |
1730382787 | 132 | 79 | 33 | 16 | 75 |
1730380987 | 132 | 79 | 33 | 16 | 75 |
1730379187 | 133 | 79 | 33 | 16 | 75 |
1730377387 | 132 | 79 | 33 | 16 | 75 |
1730375587 | 133 | 79 | 33 | 16 | 75 |
1730373787 | 132 | 79 | 33 | 16 | 75 |
1730371987 | 132 | 79 | 33 | 16 | 75 |
1730370186 | 132 | 79 | 33 | 16 | 75 |
1730368387 | 132 | 80 | 32 | 16 | 75 |
1730366587 | 132 | 80 | 33 | 16 | 75 |
1730364786 | 132 | 80 | 32 | 16 | 75 |
1730362986 | 132 | 81 | 33 | 16 | 75 |
1730361186 | 132 | 81 | 33 | 16 | 75 |
1730359386 | 132 | 82 | 33 | 16 | 75 |
1730357586 | 132 | 82 | 33 | 16 | 75 |
1730355786 | 131 | 83 | 34 | 16 | 75 |
1730353986 | 131 | 83 | 34 | 16 | 75 |
1730352186 | 132 | 83 | 34 | 16 | 75 |
1730350386 | 132 | 84 | 34 | 16 | 75 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)