This is the latest recevied telemetry packets stored in our database for station/object IR3ZWX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ARDUINO* | AMPER* | BATTERIE* | Temp_radio* | Temp_ext* |
|---|---|---|---|---|---|
| 04/26/2025 8:47:23 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 7.75 GrdC |
| 04/26/2025 8:37:22 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 7.75 GrdC |
| 04/26/2025 8:27:15 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8 GrdC |
| 04/26/2025 8:17:12 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8 GrdC |
| 04/26/2025 8:07:05 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8 GrdC |
| 04/26/2025 7:57:04 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8.25 GrdC |
| 04/26/2025 7:46:59 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8.25 GrdC |
| 04/26/2025 7:36:56 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8.5 GrdC |
| 04/26/2025 7:26:49 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8.5 GrdC |
| 04/26/2025 7:16:47 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8.75 GrdC |
| 04/26/2025 7:06:42 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 8.75 GrdC |
| 04/26/2025 6:56:39 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 9 GrdC |
| 04/26/2025 6:46:32 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 9.25 GrdC |
| 04/26/2025 6:36:30 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 9.5 GrdC |
| 04/26/2025 6:26:24 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 9.75 GrdC |
| 04/26/2025 6:16:21 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 10 GrdC |
| 04/26/2025 6:06:14 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 10 GrdC |
| 04/26/2025 5:56:13 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 10.25 GrdC |
| 04/26/2025 5:46:06 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 10.5 GrdC |
| 04/26/2025 5:25:59 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 11 GrdC |
| 04/26/2025 5:15:56 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 11 GrdC |
| 04/26/2025 5:05:49 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 11.25 GrdC |
| 04/26/2025 4:55:48 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 11.5 GrdC |
| 04/26/2025 4:45:41 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 11.5 GrdC |
| 04/26/2025 4:35:39 PM+00:00 | 5.1 Volt | -11.33 Amp. | 13.7 Volt | 0 GrdC | 11.5 GrdC |
*Used Equation Coefficients:
ARDUINO: 0, 0.1, 0
AMPER: 0, 0.1452, -18.59
BATTERIE: 0, 0.1, 0
Temp_radio: 0, 0.25, -20.5
Temp_ext: 0, 0.25, -20.5
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)