This is the latest recevied telemetry packets stored in our database for station/object YM7KGL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PANEL* | RUZGAR* | TEMP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735009560 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735008599 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735006676 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735005716 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735004755 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735003793 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735001873 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1735000910 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734998029 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734996106 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734995145 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734994186 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734993223 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734990341 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734988419 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734987458 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734986504 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734983616 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734982655 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734981694 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734980732 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734979770 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734978809 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734977850 | 0 V.. | 0 V.. | -5.5 C.. | 0 | 0 |
| 1734974005 | 0 V.. | 0 V.. | -6 C.. | 0 | 0 |
*Used Equation Coefficients:
PANEL: 0, 0.2, 0
RUZGAR: 0, 0.2, 0
TEMP: 0, 0.5, -64
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)