RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

KQ4KNT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KQ4KNT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Recived*	Dg1h*	Temp*
1734916143	130 Pkt	30 Pkt	4 C
1734915543	140 Pkt	40 Pkt	4.5 C
1734914943	130 Pkt	30 Pkt	4.5 C
1734914343	140 Pkt	40 Pkt	5 C
1734913743	130 Pkt	30 Pkt	5 C
1734913144	130 Pkt	40 Pkt	5 C
1734912543	150 Pkt	40 Pkt	5.5 C
1734911344	180 Pkt	60 Pkt	6 C
1734910744	180 Pkt	60 Pkt	6.5 C
1734910144	180 Pkt	60 Pkt	6.5 C
1734908944	190 Pkt	60 Pkt	7 C
1734908344	190 Pkt	50 Pkt	7.5 C
1734907744	200 Pkt	50 Pkt	7.5 C
1734907144	240 Pkt	60 Pkt	8 C
1734906544	280 Pkt	70 Pkt	8 C
1734905944	300 Pkt	80 Pkt	8.5 C
1734904744	320 Pkt	90 Pkt	9 C
1734904144	320 Pkt	100 Pkt	9 C
1734903544	300 Pkt	90 Pkt	9.5 C
1734902944	310 Pkt	100 Pkt	9.5 C
1734902344	280 Pkt	90 Pkt	10 C
1734901744	260 Pkt	90 Pkt	10.5 C
1734901144	250 Pkt	80 Pkt	10.5 C
1734900628	290 Pkt	80 Pkt	16.5 C
1734900544	250 Pkt	80 Pkt	10.5 C

*Used Equation Coefficients:

Recived: 0, 10, 0

Dg1h: 0, 10, 0

Temp: 0, 0.5, -64

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)