RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA1F-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1F-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734983977	39 Pkt	9 Pkt	-50 dBm	0.98 V
1734983613	13 Pkt	1 Pkt	-49 dBm	0.98 V
1734983166	24 Pkt	45 Pkt	-50 dBm	1.09 V
1734982798	29 Pkt	29 Pkt	-52 dBm	1.56 V
1734982434	40 Pkt	12 Pkt	-53 dBm	0.92 V
1734982069	37 Pkt	6 Pkt	-52 dBm	0.82 V
1734981704	35 Pkt	2 Pkt	-51 dBm	0.88 V
1734981340	40 Pkt	2 Pkt	-52 dBm	0.92 V
1734980975	32 Pkt	0 Pkt	-53 dBm	0.94 V
1734980610	10 Pkt	0 Pkt	-51 dBm	0.9 V
1734980478	34 Pkt	8 Pkt	-51 dBm	0.94 V
1734980114	38 Pkt	3 Pkt	-52 dBm	0.92 V
1734979749	33 Pkt	4 Pkt	-52 dBm	0.88 V
1734979384	35 Pkt	7 Pkt	-53 dBm	0.9 V
1734979019	42 Pkt	6 Pkt	-51 dBm	0.88 V
1734978656	39 Pkt	7 Pkt	-54 dBm	0.88 V
1734978289	37 Pkt	3 Pkt	-52 dBm	0.82 V
1734977925	37 Pkt	2 Pkt	-51 dBm	0.9 V
1734977560	17 Pkt	1 Pkt	-52 dBm	1.05 V
1734977406	36 Pkt	3 Pkt	-52 dBm	0.86 V
1734977042	32 Pkt	8 Pkt	-51 dBm	1.05 V
1734976678	43 Pkt	7 Pkt	-52 dBm	0.94 V
1734976312	30 Pkt	4 Pkt	-52 dBm	0.78 V
1734975948	37 Pkt	5 Pkt	-52 dBm	0.92 V
1734975583	30 Pkt	3 Pkt	-54 dBm	0.88 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)