RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

F5ZYP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5ZYP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734937027	13.8 Volt	170 Pkt	80 Pkt	75 Pcnt
1734936727	13.8 Volt	160 Pkt	80 Pkt	73 Pcnt
1734936427	13.8 Volt	150 Pkt	70 Pkt	72 Pcnt
1734936127	13.8 Volt	140 Pkt	70 Pkt	68 Pcnt
1734930126	13.8 Volt	60 Pkt	30 Pkt	43 Pcnt
1734929826	13.8 Volt	50 Pkt	30 Pkt	45 Pcnt
1734929526	13.8 Volt	60 Pkt	30 Pkt	44 Pcnt
1734929226	13.8 Volt	60 Pkt	30 Pkt	44 Pcnt
1734928926	13.8 Volt	50 Pkt	30 Pkt	46 Pcnt
1734928626	13.8 Volt	50 Pkt	30 Pkt	46 Pcnt
1734928326	13.8 Volt	50 Pkt	30 Pkt	46 Pcnt
1734928028	13.8 Volt	50 Pkt	30 Pkt	44 Pcnt
1734928026	13.8 Volt	50 Pkt	30 Pkt	44 Pcnt
1734927726	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734927429	13.8 Volt	50 Pkt	30 Pkt	42 Pcnt
1734927426	13.8 Volt	50 Pkt	30 Pkt	42 Pcnt
1734927127	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734926828	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734926826	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734926527	13.8 Volt	50 Pkt	30 Pkt	42 Pcnt
1734926228	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734926227	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734925927	13.8 Volt	50 Pkt	30 Pkt	43 Pcnt
1734925628	13.8 Volt	50 Pkt	30 Pkt	41 Pcnt
1734925626	13.8 Volt	50 Pkt	30 Pkt	41 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)