This is the latest recevied telemetry packets stored in our database for station/object K4LIX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 04/10/2025 12:28:19 AM+00:00 | 459 | 623 | 0 | 0 | 0 |
| 04/10/2025 12:25:54 AM+00:00 | 460 | 623 | 0 | 0 | 0 |
| 04/10/2025 12:00:17 AM+00:00 | 439 | 630 | 0 | 0 | 0 |
| 04/09/2025 11:59:22 PM+00:00 | 436 | 630 | 0 | 0 | 0 |
| 04/09/2025 11:57:21 PM+00:00 | 438 | 630 | 0 | 0 | 0 |
| 04/09/2025 11:56:37 PM+00:00 | 433 | 630 | 0 | 0 | 0 |
| 04/09/2025 11:52:55 PM+00:00 | 438 | 632 | 0 | 0 | 0 |
| 04/09/2025 11:50:51 PM+00:00 | 441 | 633 | 0 | 0 | 0 |
| 04/09/2025 11:50:46 PM+00:00 | 435 | 633 | 0 | 0 | 0 |
| 04/09/2025 11:50:12 PM+00:00 | 433 | 633 | 0 | 0 | 0 |
| 04/09/2025 11:49:50 PM+00:00 | 456 | 633 | 0 | 0 | 0 |
| 04/09/2025 11:49:38 PM+00:00 | 462 | 632 | 0 | 0 | 0 |
| 04/09/2025 11:49:31 PM+00:00 | 464 | 632 | 0 | 0 | 0 |
| 04/09/2025 11:49:20 PM+00:00 | 461 | 632 | 0 | 0 | 0 |
| 04/09/2025 11:48:58 PM+00:00 | 463 | 631 | 0 | 0 | 0 |
| 04/09/2025 11:48:33 PM+00:00 | 463 | 631 | 0 | 0 | 0 |
| 04/09/2025 11:48:12 PM+00:00 | 464 | 630 | 0 | 0 | 0 |
| 04/09/2025 11:34:43 PM+00:00 | 414 | 630 | 0 | 0 | 0 |
| 04/09/2025 11:04:43 PM+00:00 | 436 | 637 | 0 | 0 | 0 |
| 04/09/2025 11:04:32 PM+00:00 | 438 | 637 | 0 | 0 | 0 |
| 04/09/2025 11:04:06 PM+00:00 | 437 | 636 | 0 | 0 | 0 |
| 04/09/2025 11:02:30 PM+00:00 | 437 | 637 | 0 | 0 | 0 |
| 04/09/2025 10:59:13 PM+00:00 | 460 | 638 | 0 | 0 | 0 |
| 04/09/2025 10:58:53 PM+00:00 | 465 | 637 | 0 | 0 | 0 |
| 04/09/2025 10:52:32 PM+00:00 | 415 | 636 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)