RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YO5KIP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO5KIP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1730449118	13.19 Volt	1310 Pkt	80 Pkt	60 Pcnt
1730449095	13.19 Volt	1310 Pkt	80 Pkt	60 Pcnt
1730447895	13.19 Volt	1360 Pkt	90 Pkt	61 Pcnt
1730447348	13.19 Volt	1350 Pkt	90 Pkt	61 Pcnt
1730446695	13.19 Volt	1350 Pkt	100 Pkt	62 Pcnt
1730445546	13.19 Volt	1420 Pkt	90 Pkt	64 Pcnt
1730445495	13.19 Volt	1420 Pkt	90 Pkt	64 Pcnt
1730444295	13.19 Volt	1410 Pkt	90 Pkt	64 Pcnt
1730443702	13.19 Volt	1400 Pkt	100 Pkt	63 Pcnt
1730443095	13.19 Volt	1390 Pkt	110 Pkt	63 Pcnt
1730441905	13.19 Volt	1350 Pkt	110 Pkt	63 Pcnt
1730441895	13.19 Volt	1350 Pkt	110 Pkt	63 Pcnt
1730440695	13.19 Volt	1400 Pkt	100 Pkt	66 Pcnt
1730440103	13.19 Volt	1400 Pkt	80 Pkt	67 Pcnt
1730439495	13.19 Volt	1360 Pkt	80 Pkt	66 Pcnt
1730438297	13.11 Volt	1310 Pkt	80 Pkt	65 Pcnt
1730438295	13.11 Volt	1310 Pkt	80 Pkt	65 Pcnt
1730437095	13.19 Volt	1230 Pkt	90 Pkt	63 Pcnt
1730436507	13.19 Volt	1200 Pkt	90 Pkt	62 Pcnt
1730435895	13.19 Volt	1210 Pkt	100 Pkt	62 Pcnt
1730434698	13.19 Volt	1170 Pkt	110 Pkt	62 Pcnt
1730434695	13.19 Volt	1170 Pkt	110 Pkt	62 Pcnt
1730433495	13.19 Volt	1130 Pkt	110 Pkt	63 Pcnt
1730431098	13.19 Volt	1210 Pkt	100 Pkt	62 Pcnt
1730431096	13.19 Volt	1210 Pkt	100 Pkt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)