RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA1NI-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1730434640	87 Pkt	23 Pkt	25 Pkt	-61 dBm	0.02 V
1730433910	80 Pkt	14 Pkt	22 Pkt	-62 dBm	0 V
1730433180	94 Pkt	20 Pkt	11 Pkt	-62 dBm	0 V
1730430990	76 Pkt	18 Pkt	15 Pkt	-62 dBm	0 V
1730430260	77 Pkt	17 Pkt	11 Pkt	-63 dBm	0.04 V
1730429530	91 Pkt	20 Pkt	12 Pkt	-61 dBm	0 V
1730428800	85 Pkt	16 Pkt	12 Pkt	-59 dBm	0 V
1730428070	88 Pkt	18 Pkt	16 Pkt	-60 dBm	0.04 V
1730427340	74 Pkt	19 Pkt	16 Pkt	-59 dBm	0 V
1730426610	81 Pkt	18 Pkt	19 Pkt	-59 dBm	0.04 V
1730425880	90 Pkt	17 Pkt	17 Pkt	-60 dBm	0.04 V
1730425150	66 Pkt	16 Pkt	16 Pkt	-61 dBm	0.04 V
1730424420	82 Pkt	13 Pkt	17 Pkt	-60 dBm	0.04 V
1730423690	56 Pkt	14 Pkt	18 Pkt	-61 dBm	0.04 V
1730423115	84 Pkt	17 Pkt	8 Pkt	-59 dBm	0.04 V
1730422385	89 Pkt	15 Pkt	14 Pkt	-59 dBm	0.04 V
1730421655	86 Pkt	12 Pkt	17 Pkt	-60 dBm	0.04 V
1730420925	9 Pkt	0 Pkt	1 Pkt	-59 dBm	0.04 V
1730420036	88 Pkt	14 Pkt	16 Pkt	-59 dBm	0 V
1730419306	68 Pkt	24 Pkt	19 Pkt	-62 dBm	0.04 V
1730418576	83 Pkt	21 Pkt	11 Pkt	-61 dBm	0.04 V
1730417846	86 Pkt	18 Pkt	11 Pkt	-60 dBm	0.04 V
1730417116	83 Pkt	15 Pkt	18 Pkt	-59 dBm	0.04 V
1730416386	94 Pkt	19 Pkt	8 Pkt	-58 dBm	0 V
1730415656	90 Pkt	15 Pkt	14 Pkt	-56 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)