RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BM6HIP-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM6HIP-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1734965161	28.7 C	33 p	110 p	2025 p
1734963961	29.4 C	39 p	118 p	1992 p
1734962761	29.2 C	38 p	130 p	1953 p
1734961562	29.2 C	41 p	132 p	1915 p
1734960362	29.8 C	51 p	134 p	1874 p
1734959162	29.2 C	40 p	132 p	1823 p
1734957961	29.3 C	43 p	130 p	1783 p
1734956761	29.6 C	49 p	159 p	1740 p
1734955561	28.9 C	38 p	189 p	1691 p
1734954362	30 C	72 p	234 p	1653 p
1734953162	29.7 C	79 p	221 p	1581 p
1734951962	29.4 C	83 p	199 p	1502 p
1734950761	29.3 C	59 p	218 p	1419 p
1734949561	29.6 C	57 p	276 p	1360 p
1734948361	28.8 C	102 p	300 p	1303 p
1734947162	29.6 C	117 p	239 p	1201 p
1734945961	29.2 C	81 p	167 p	1084 p
1734944761	29.3 C	41 p	130 p	1003 p
1734943561	28.7 C	45 p	126 p	962 p
1734942362	29.3 C	44 p	141 p	917 p
1734941161	29.8 C	37 p	151 p	873 p
1734939961	29.3 C	60 p	147 p	836 p
1734938761	29.1 C	54 p	147 p	776 p
1734937562	29.3 C	33 p	189 p	722 p
1734936361	29.3 C	60 p	191 p	689 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)