This is the latest recevied telemetry packets stored in our database for station/object N7RVS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716949219 | 416 | 637 | 0 | 0 | 0 |
1716947307 | 418 | 637 | 0 | 0 | 0 |
1716947187 | 418 | 637 | 0 | 0 | 0 |
1716947068 | 418 | 637 | 0 | 0 | 0 |
1716946709 | 418 | 638 | 0 | 0 | 0 |
1716946589 | 418 | 638 | 0 | 0 | 0 |
1716946470 | 419 | 637 | 0 | 0 | 0 |
1716946111 | 418 | 638 | 0 | 0 | 0 |
1716943481 | 428 | 639 | 0 | 0 | 0 |
1716936189 | 431 | 624 | 0 | 0 | 0 |
1716935830 | 450 | 623 | 0 | 0 | 0 |
1716935592 | 450 | 623 | 0 | 0 | 0 |
1716935233 | 453 | 623 | 0 | 0 | 0 |
1716934874 | 451 | 623 | 0 | 0 | 0 |
1716934635 | 451 | 622 | 0 | 0 | 0 |
1716930454 | 451 | 622 | 0 | 0 | 0 |
1716929618 | 451 | 622 | 0 | 0 | 0 |
1716929499 | 452 | 622 | 0 | 0 | 0 |
1716926989 | 452 | 622 | 0 | 0 | 0 |
1716925436 | 452 | 622 | 0 | 0 | 0 |
1716925077 | 450 | 622 | 0 | 0 | 0 |
1716924958 | 452 | 622 | 0 | 0 | 0 |
1716924839 | 451 | 622 | 0 | 0 | 0 |
1716924720 | 450 | 622 | 0 | 0 | 0 |
1716924600 | 451 | 622 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)