RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR9WXL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*
1734920283	87 Pkt	2 Pkt
1734919683	78 Pkt	4 Pkt
1734919080	90 Pkt	2 Pkt
1734918480	66 Pkt	3 Pkt
1734917878	96 Pkt	3 Pkt
1734917275	82 Pkt	3 Pkt
1734916673	89 Pkt	3 Pkt
1734916076	100 Pkt	3 Pkt
1734915471	68 Pkt	2 Pkt
1734914871	73 Pkt	8 Pkt
1734914256	79 Pkt	2 Pkt
1734913656	70 Pkt	4 Pkt
1734913054	89 Pkt	2 Pkt
1734912454	70 Pkt	4 Pkt
1734911852	82 Pkt	3 Pkt
1734911249	67 Pkt	3 Pkt
1734910646	85 Pkt	3 Pkt
1734910047	67 Pkt	3 Pkt
1734909444	84 Pkt	2 Pkt
1734908844	80 Pkt	4 Pkt
1734908239	92 Pkt	2 Pkt
1734907640	77 Pkt	4 Pkt
1734907037	94 Pkt	2 Pkt
1734906438	79 Pkt	3 Pkt
1734905835	76 Pkt	7 Pkt

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)