This is the latest recevied telemetry packets stored in our database for station/object KD6VPH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Eff1h* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734936980 | 13.83 Volt | 50 Pkt | 82 Pcnt | 0 | 0 |
| 1734936080 | 13.83 Volt | 50 Pkt | 80 Pcnt | 0 | 0 |
| 1734929780 | 13.83 Volt | 50 Pkt | 83 Pcnt | 0 | 0 |
| 1734928880 | 13.83 Volt | 50 Pkt | 78 Pcnt | 0 | 0 |
| 1734927980 | 13.83 Volt | 50 Pkt | 76 Pcnt | 0 | 0 |
| 1734927080 | 13.83 Volt | 50 Pkt | 78 Pcnt | 0 | 0 |
| 1734926180 | 13.83 Volt | 50 Pkt | 78 Pcnt | 0 | 0 |
| 1734925280 | 13.83 Volt | 70 Pkt | 86 Pcnt | 0 | 0 |
| 1734924380 | 13.83 Volt | 70 Pkt | 86 Pcnt | 0 | 0 |
| 1734923480 | 13.83 Volt | 70 Pkt | 87 Pcnt | 0 | 0 |
| 1734922580 | 13.83 Volt | 60 Pkt | 88 Pcnt | 0 | 0 |
| 1734921680 | 13.83 Volt | 60 Pkt | 86 Pcnt | 0 | 0 |
| 1734920780 | 13.83 Volt | 50 Pkt | 86 Pcnt | 0 | 0 |
| 1734919881 | 13.83 Volt | 60 Pkt | 88 Pcnt | 0 | 0 |
| 1734918980 | 13.83 Volt | 50 Pkt | 87 Pcnt | 0 | 0 |
| 1734918080 | 13.83 Volt | 50 Pkt | 85 Pcnt | 0 | 0 |
| 1734917180 | 13.83 Volt | 50 Pkt | 84 Pcnt | 0 | 0 |
| 1734916280 | 13.83 Volt | 50 Pkt | 82 Pcnt | 0 | 0 |
| 1734915380 | 13.83 Volt | 50 Pkt | 82 Pcnt | 0 | 0 |
| 1734913581 | 13.83 Volt | 40 Pkt | 81 Pcnt | 0 | 0 |
| 1734912681 | 13.83 Volt | 40 Pkt | 82 Pcnt | 0 | 0 |
| 1734911781 | 13.83 Volt | 40 Pkt | 81 Pcnt | 0 | 0 |
| 1734909981 | 13.83 Volt | 60 Pkt | 84 Pcnt | 0 | 0 |
| 1734908181 | 13.83 Volt | 60 Pkt | 83 Pcnt | 0 | 0 |
| 1734907281 | 13.83 Volt | 60 Pkt | 83 Pcnt | 0 | 0 |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Eff1h: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)