This is the latest recevied telemetry packets stored in our database for station/object KG9B-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1716212345 | 148 | 45 | 0 | 0 | 0 |
1716211445 | 146 | 45 | 0 | 0 | 0 |
1716209645 | 149 | 45 | 0 | 0 | 0 |
1716208745 | 147 | 44 | 0 | 0 | 0 |
1716207846 | 146 | 45 | 0 | 0 | 0 |
1716205144 | 146 | 40 | 0 | 0 | 0 |
1716202445 | 147 | 45 | 0 | 0 | 0 |
1716200644 | 146 | 45 | 0 | 0 | 0 |
1716199744 | 150 | 44 | 0 | 0 | 0 |
1716198844 | 150 | 44 | 0 | 0 | 0 |
1716197944 | 152 | 45 | 0 | 0 | 0 |
1716196143 | 152 | 45 | 0 | 0 | 0 |
1716192543 | 151 | 44 | 0 | 0 | 0 |
1716189842 | 151 | 44 | 0 | 0 | 0 |
1716188942 | 152 | 44 | 0 | 0 | 0 |
1716188042 | 149 | 44 | 0 | 0 | 0 |
1716185341 | 150 | 45 | 0 | 0 | 0 |
1716184441 | 152 | 44 | 0 | 0 | 0 |
1716179941 | 151 | 44 | 0 | 0 | 0 |
1716179040 | 149 | 44 | 0 | 0 | 0 |
1716176340 | 150 | 44 | 0 | 0 | 0 |
1716174539 | 149 | 44 | 0 | 0 | 0 |
1716170039 | 153 | 44 | 0 | 0 | 0 |
1716169138 | 152 | 45 | 0 | 0 | 0 |
1716167338 | 149 | 45 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)