This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Dg10M* |
|---|---|---|---|---|---|
| 1734967371 | 14.4 Volt | 410 Pkt | 10 Pkt | 65 Pcnt | 0 Pkt |
| 1734963765 | 14.4 Volt | 430 Pkt | 10 Pkt | 71 Pcnt | 0 Pkt |
| 1734960163 | 14.4 Volt | 440 Pkt | 10 Pkt | 75 Pcnt | 0 Pkt |
| 1734956560 | 14.4 Volt | 430 Pkt | 10 Pkt | 72 Pcnt | 0 Pkt |
| 1734952954 | 14.4 Volt | 400 Pkt | 10 Pkt | 72 Pcnt | 0 Pkt |
| 1734949352 | 14.4 Volt | 340 Pkt | 10 Pkt | 65 Pcnt | 0 Pkt |
| 1734945749 | 14.4 Volt | 360 Pkt | 10 Pkt | 66 Pcnt | 0 Pkt |
| 1734942147 | 14.4 Volt | 360 Pkt | 10 Pkt | 68 Pcnt | 0 Pkt |
| 1734938549 | 14.4 Volt | 390 Pkt | 10 Pkt | 71 Pcnt | 0 Pkt |
| 1734927733 | 14.4 Volt | 330 Pkt | 10 Pkt | 66 Pcnt | 0 Pkt |
| 1734924127 | 14.4 Volt | 330 Pkt | 10 Pkt | 66 Pcnt | 0 Pkt |
| 1734920524 | 14.4 Volt | 410 Pkt | 10 Pkt | 67 Pcnt | 0 Pkt |
| 1734916922 | 14.4 Volt | 340 Pkt | 0 Pkt | 64 Pcnt | 0 Pkt |
| 1734913315 | 14.4 Volt | 250 Pkt | 10 Pkt | 48 Pcnt | 0 Pkt |
| 1734909714 | 14.4 Volt | 250 Pkt | 20 Pkt | 49 Pcnt | 0 Pkt |
| 1734906110 | 14.4 Volt | 180 Pkt | 10 Pkt | 44 Pcnt | 0 Pkt |
| 1734902506 | 14.4 Volt | 290 Pkt | 20 Pkt | 44 Pcnt | 0 Pkt |
| 1734898903 | 14.4 Volt | 330 Pkt | 10 Pkt | 54 Pcnt | 0 Pkt |
| 1734895299 | 14.4 Volt | 230 Pkt | 10 Pkt | 45 Pcnt | 0 Pkt |
| 1734891698 | 14.4 Volt | 200 Pkt | 0 Pkt | 49 Pcnt | 0 Pkt |
| 1734888095 | 14.4 Volt | 150 Pkt | 10 Pkt | 40 Pcnt | 0 Pkt |
| 1734884489 | 14.4 Volt | 240 Pkt | 20 Pkt | 53 Pcnt | 0 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Dg10M: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)