RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS7WWW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS7WWW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1730755606	4 Pkt	-76 dBm	10.01 V
1730755052	1 Pkt	-77 dBm	9 V
1730754361	1 Pkt	-77 dBm	9.99 V
1730753739	3 Pkt	-79 dBm	10.03 V
1730753116	1 Pkt	-80 dBm	10.03 V
1730752494	1 Pkt	-80 dBm	9.99 V
1730751872	4 Pkt	-78 dBm	8.96 V
1730751260	1 Pkt	-79 dBm	10.01 V
1730750627	1 Pkt	-79 dBm	10.23 V
1730750006	3 Pkt	-81 dBm	9.99 V
1730749382	2 Pkt	-81 dBm	10.01 V
1730748760	2 Pkt	-80 dBm	9 V
1730748143	2 Pkt	-80 dBm	9.99 V
1730747554	3 Pkt	-79 dBm	10.03 V
1730746900	2 Pkt	-81 dBm	10.01 V
1730746271	1 Pkt	-78 dBm	10.01 V
1730745654	2 Pkt	-80 dBm	10.01 V
1730745027	3 Pkt	-82 dBm	10.03 V
1730744406	1 Pkt	-82 dBm	9.99 V
1730743783	2 Pkt	-82 dBm	9.99 V
1730743180	2 Pkt	-81 dBm	9.99 V
1730742592	1 Pkt	-82 dBm	10.01 V
1730741928	2 Pkt	-84 dBm	10.01 V
1730741315	4 Pkt	-83 dBm	9.04 V
1730740686	1 Pkt	-83 dBm	9.99 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)