This is the latest recevied telemetry packets stored in our database for station/object SP6BRT-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1730817602 | 560 | 5 | 0 | 0 | 0 |
| 1730817009 | 570 | 5 | 0 | 0 | 0 |
| 1730816407 | 520 | 5 | 0 | 0 | 0 |
| 1730815802 | 470 | 5 | 0 | 0 | 0 |
| 1730814601 | 450 | 5 | 0 | 0 | 0 |
| 1730814009 | 450 | 5 | 0 | 0 | 0 |
| 1730813402 | 440 | 5 | 0 | 0 | 0 |
| 1730812810 | 450 | 5 | 0 | 0 | 0 |
| 1730812202 | 440 | 5 | 0 | 0 | 0 |
| 1730811609 | 450 | 5 | 0 | 0 | 0 |
| 1730811007 | 450 | 5 | 0 | 0 | 0 |
| 1730810410 | 460 | 5 | 0 | 0 | 0 |
| 1730809209 | 440 | 5 | 0 | 0 | 0 |
| 1730808602 | 440 | 5 | 0 | 0 | 0 |
| 1730806209 | 440 | 5 | 0 | 0 | 0 |
| 1730804402 | 430 | 5 | 0 | 0 | 0 |
| 1730802609 | 440 | 5 | 0 | 0 | 0 |
| 1730801409 | 440 | 5 | 0 | 0 | 0 |
| 1730800203 | 460 | 5 | 0 | 0 | 0 |
| 1730799609 | 450 | 5 | 0 | 0 | 0 |
| 1730799002 | 450 | 5 | 0 | 0 | 0 |
| 1730796602 | 510 | 8 | 0 | 0 | 0 |
| 1730796009 | 500 | 8 | 0 | 0 | 0 |
| 1730795402 | 500 | 8 | 0 | 0 | 0 |
| 1730794809 | 480 | 7 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)